Recent Projects
Need real images of products for your reference? Check out over 2,000 recent projects of our customers.
TIP: Click the image for more pictures!
Need real images of products for your reference? Check out over 2,000 recent projects of our customers.
TIP: Click the image for more pictures!
The Salvation Army required eco-friendly tumblers in a natural colour, each printed with two logos, to fulfil a last-minute order within a tight delivery timeline. The organisation worked within a strict per-item budget that needed to cover printing and shipping, and sought recommendations on product options that could accommodate both the compressed schedule and the proposed budget.
MeowPrint sourced the CE28 Eco-Friendly Wheat Fibre Tumbler in a natural beige speckled finish, which aligned with the organisation’s sustainability focus and budget requirements. The iconic red shield logo and the accompanying “It Takes A Village” tagline in dark text were applied via UV printing, ensuring sharp colour reproduction of the red and white artwork against the textured wheat fibre surface. Artwork positioning was centred on the body of the tumbler, with the shield logo placed prominently above the event tagline for clear visibility. Each unit — including the screw-on lid and carrying strap — was inspected for print adhesion and colour consistency before bulk packing, and the full run of the bulk order was delivered within the compressed timeline.
Write Edge Pte Ltd required 150 pieces of coral highlighters customised with their logo via silk screen printing. Before proceeding with the order, they needed to review a mock-up of the product to verify that their logo was appropriately sized for the print area.
MeowPrint supplied 150 units of the HL03 Coral Highlighter — a star-shaped, five-pronged white body with orange, blue, green, yellow, and pink capped tips. Before production, a digital mock-up was prepared and sent to the client for sign-off, confirming that the Write Edge logo and “English & Writing Specialist” tagline were correctly sized and centred on the flat white print area of the body. The branding was then applied via silk screen printing in blue ink, producing a clean, legible finish against the white plastic surface. Each unit was inspected to ensure consistent ink coverage and alignment before bulk packing and delivery.
Cedar Girls’ Secondary School required 270 full-colour sublimation-printed lanyards with medium-sized cardholders for their VCAMUN 2025 event. The lanyards needed to be 20mm wide in dark red (#3F0606), featuring the text “VCAMUN 2025” and the event logo printed without its background on both sides, finished with lobster claw clips. The school also required payment processing via GeBIZ and sought clarity on estimated production and delivery timelines.
MeowPrint produced three colour variants of the VCAMUN 2025 lanyards using full-colour dye-sublimation printing on smooth satin polyester straps — a black, a dark maroon-red, and a royal blue — each featuring the “VCAMUN 2025” text and the event’s laurel-wreath emblem printed on both sides of the 20mm strap. The artwork incorporated bold diagonal chevron stripes transitioning into a geometric pattern towards the neck loop, with the design printed edge-to-edge for a polished, borderless finish. Each lanyard was fitted with a metal lobster claw clip and paired with a medium-sized cardholder. Payment was processed through GeBIZ, and the full order of 270 pieces was quality-checked and delivered ahead of the event date.
Tiffany required 100 pieces of metal pens customised with UV printing. The pens needed to feature a polished, professional finish suitable for corporate gifting or event distribution.
MeowPrint produced 100 units of the MP29 Metal Pen in a clean white body with gunmetal clip and press-top accents, providing a polished base for the client’s branding. The Glam AI logo and wordmark were applied via UV printing on the upper barrel, reproducing the circular icon’s pink-to-orange gradient and the bold black typeface with sharp definition against the white surface. UV printing was selected for its ability to render multi-colour gradients accurately on curved metal substrates while maintaining scratch resistance. Each pen underwent a visual quality check to verify colour consistency and logo alignment before bulk packing for delivery.
Humand Technologies, Inc. required 550 custom sublimation-printed lanyards with cardholders, featuring multi-colour branding with two to three print colours displayed around the lanyard. The design incorporated both the company’s own artwork and an additional SMRT logo, with high-resolution files provided. The order needed to be fulfilled with a tight deadline, forming part of a larger suite of branded event materials.
MeowPrint produced 550 custom lanyards on white polyester strap using full-colour sublimation printing, which allowed the red SMRT Corporation logo, its accompanying red circular emblem, and the dark blue “humand” wordmark to be rendered with sharp definition and consistent colour density across the entire run. The artwork layout alternated both logos at regular intervals along the lanyard length, with gold accent lines incorporated near the SMRT branding — all printed on both sides of the strap for full visibility when worn. Each lanyard was fitted with a metal bulldog clip attachment and paired with a cardholder add-on. Colour proofing was conducted against the client’s high-resolution files prior to production to ensure brand accuracy across all three print colours, and the full order of 550 pieces was completed within the required timeline.
Citco Singapore Pte Ltd required branded foldable umbrellas in navy, with a firm delivery deadline. A key concern was ensuring close colour consistency between the umbrella’s base navy fabric and the company logo’s navy tone, with any significant variance to be flagged early in the process. The team also requested a mock-up design promptly given the tight turnaround and remained open to alternative product suggestions.
MeowPrint produced these 28″ pongee foldable umbrellas in a royal blue base, with the multi-element Mercator by Citco artwork applied via Direct-To-Film (DTF) printing. The DTF method was selected to accurately reproduce the fine detail of the QR code alongside the white logotype and gold accent on the “A” character — elements that required sharp contrast against the blue fabric. A pre-production mock-up was prepared promptly so the client could verify colour consistency between the umbrella’s pongee fabric and the navy tones in the logo before bulk printing commenced. Each completed umbrella was paired with its matching blue pouch and fitted with a black foam grip handle, then inspected to confirm print adhesion and QR code scannability prior to dispatch within the required deadline.
The Singapore Motor Cycle Trade Association required 200 pieces of non-woven bags featuring high-quality printed branding, intended for distribution to their association members. The bags needed to be durable and presentable, with vivid, detailed print quality that reflected the association’s professional image.
MeowPrint produced 200 units of the NW21 A4 portrait non-woven bag in a vibrant royal blue, with the association’s emblem applied via Direct-To-Film (DTF) printing centred on the front face of each bag. The DTF method was selected to accurately reproduce the multi-colour crest — including the dark navy wheel motif, blue gear-tooth border, green laurel wreath detailing, and bilingual English and Chinese text — with sharp edges and strong opacity against the blue non-woven fabric. The bags were constructed using ultrasonic bonding rather than thread stitching, ensuring clean seams along the base and side gussets, while the matching blue handles were cross-stitched at the attachment points for reinforced load bearing. Each piece was inspected for print adhesion and colour consistency before bulk packing for delivery.
SGListCos required 500 plastic pens printed with their company logo, working within a budget of SGD 1.00 to SGD 1.50 per piece. They needed a selection of pen options to choose from and required the order to be completed within a 5 working days timeline.
MeowPrint supplied 500 units of the PP60 plastic pen in a silver barrel with blue clip and grip accents, selected by the client from a curated range of seven pen models to match their budget. The SGListCos logo — featuring the overlapping green, yellow, and dark blue diamond icon alongside the organisation name and “Association of Singapore Listed Companies” tagline — was applied via UV printing on the upper barrel area near the clip. UV printing was chosen to reproduce the multi-colour logo with sharp detail on the curved silver surface, ensuring the small icon elements remained crisp. A proof was confirmed before production commenced, and the full order was completed and delivered within the five working day timeframe.
Stroke Support Station required 150 full-colour lanyards with add-on cardholders featuring their organisation’s logo. They needed guidance on artwork specifications and the overall ordering process, and requested physical samples of the finished product for review and approval prior to committing to the full production run.
MeowPrint produced these lanyards for Stroke Support Station using full-colour dye-sublimation printing on a white polyester strap, which allowed the vibrant multi-colour artwork — featuring bold geometric shapes in teal, magenta, blue, and orange alongside the “TEAM S3” branding and S3 logo in pink and blue — to be rendered with sharp detail and consistent colour saturation across the full length of the lanyard. The artwork was reviewed and optimised for repeat pattern alignment before production, ensuring the logo, “Stroke Support Station” wordmark, and decorative elements sat correctly on both sides. Physical samples were provided for the client’s approval prior to the full 150-piece run. Each lanyard was finished with a silver metal lobster-claw clip and paired with an add-on cardholder for practical daily use.
JERA Global Markets Pte. Ltd. required 500 full-colour sublimation printed lanyards with add-on cardholders. The design needed to feature their logo on both sides of the lanyard at the neck area, with consistent orientation throughout. Colour accuracy was a key concern, particularly ensuring that the “Global Markets” text within their logo would print in pure white rather than carrying any blue tint.
MeowPrint produced these lanyards using full-colour sublimation printing on a smooth satin-finish polyester strap in a deep navy blue base. The JERA Global Markets logo and accompanying cross-shaped graphic motif were printed in crisp white, with the branding repeated at regular intervals along both sides of the lanyard to maintain visibility regardless of how the strap sat around the neck. Particular attention was given during pre-press colour proofing to ensure the “Global Markets” text rendered in pure white without picking up any blue tint from the surrounding base colour. Each lanyard was assembled with a black plastic safety buckle and a silver metal lobster-claw clip, then paired with an add-on cardholder before final quality inspection and bulk delivery of the 500-piece order.
Tripartite Alliance Limited required 140 units of nylon backpacks featuring their logo, printed using Direct-To-Film (DTF) printing. They sought guidance on optimal logo placement and needed both production and delivery completed within a tight 10-day turnaround.
MeowPrint produced 140 units of the BP73 nylon backpack in a heather purple colourway with a contrasting black base panel, customised with the Tripartite Collective logo via Direct-To-Film (DTF) printing. The multi-colour triangular logo — featuring yellow, red, and blue elements alongside the organisation name — was positioned centrally on the front zip pocket, ensuring strong visibility against the textured purple fabric. DTF was selected for its ability to reproduce the logo’s vibrant, distinct colour separations with a smooth finish on the nylon weave. Artwork placement was confirmed through a digital mock-up before production commenced, and each unit was inspected for print adhesion and colour accuracy. The full order was completed and delivered within the required 10-day window.
T&T Salvage Asia Pte Ltd required 500 pieces of custom full-colour sublimation printed lanyards with cardholders, featuring a new “Simple Blue” design based on their existing lanyard branding. The company needed guidance on design feasibility and required delivery within a two-week timeframe, making both design approval turnaround and production scheduling critical considerations.
MeowPrint produced these lanyards using full-colour dye-sublimation printing on smooth polyester ribbon, which allowed the dual-tone blue gradient — transitioning from light cyan on one side to a deeper royal blue on the other — to render with sharp colour separation. The artwork incorporated the “T&T Salvage” company name in white, repeating ship wheel motifs with a red “T” centre detail, and both the United States and Singapore national flags spaced along the lanyard length. A digital proof was prepared and approved before production to confirm the positioning of each element across the repeating layout. Each lanyard was finished with a teal fabric end-tab and a metal lobster-claw clasp, with cardholders attached as an add-on. The full batch of 500 pieces was quality-checked for colour consistency and print alignment, then delivered within the two-week timeframe.
Generation You Employed, Singapore Ltd required approximately 150 pieces of PU leather notebooks for their needs. The organisation was exploring options for a professional notebook solution and sought pricing and customisation details for the specific model, with silk screen printing to incorporate their branding.
MeowPrint produced 150 units of the NB52 PU leather notebook in a rich royal blue colourway, customised with the Generation Singapore logo via silk screen printing in white ink. The brush-style “Generation” wordmark and “SINGAPORE” text were positioned on the lower front cover, ensuring strong brand visibility against the deep blue PU leather surface. Artwork was prepared and proofed to maintain the clean edges of the underline detail within the logo. Each notebook was finished with a matching blue elastic closure band and a gold-toned ribbon bookmark, and units were inspected for print adhesion and colour consistency on the textured PU material before delivery.
Lansweeper required 100 units of stainless steel vacuum flasks with a two-colour logo print, delivered to a single location. They needed an official quotation along with artwork proofs to be shared promptly so they could confirm the order without delay.
MeowPrint produced 100 units of the VF50 glossy black stainless steel vacuum flask, each customised with the Lansweeper logo via UV printing. The two-colour logo — featuring orange and white elements — was positioned near the base of the flask body, providing a clean, understated placement against the high-gloss black surface. An official quotation and digital artwork proof were prepared and shared for the client’s sign-off before production commenced. UV printing was selected for its strong adhesion to the curved, glossy stainless steel surface, ensuring the fine logo details remained crisp and durable. Each unit was inspected for print alignment and colour accuracy prior to bulk packing and delivery to the designated location.
The NUS Physiology Department required customised full-colour lanyards with cardholders for an international scientific symposium co-organised at the National University of Singapore, scheduled from 28th to 30th May 2025. With an estimated 65 participants, the department needed vibrant, detailed designs and sought guidance on design specifications, including file type, dimensions, and resolution requirements, to ensure the finished products met the standards of a prestigious academic event.
MeowPrint produced two distinct lanyard colourways using full-colour dye-sublimation printing on smooth polyester webbing — one in a pink-to-magenta gradient with pixel-art style graphics, and another in a light blue-to-deep blue scheme featuring geometric architectural motifs. Both variants carried the “31st International Cell Death Society” event text, the ICDS globe logo, and the NUS crest with “National University of Singapore” branding, all reproduced in sharp detail across the full length of each lanyard. The back sections featured an abstract pattern in orange, yellow, and pink tones, adding a distinctive design flourish visible when worn. Each lanyard was finished with colour-matched fabric end tabs — magenta for the pink variant, teal for the blue — stitched to metal lobster-claw clips. Prior to production, the team provided artwork guidance on resolution and layout dimensions to ensure the multi-colour gradients and fine logo details transferred cleanly through the sublimation process.
Stroke Support Station required full-zip executive bomber jackets embroidered with their company logo. The organisation needed guidance on the production process and sought to confirm whether any additional customisation beyond the logo embroidery would be necessary to meet their requirements.
MeowPrint produced EJ03 Full-Zip Executive Bomber Jacket in navy blue, featuring the S3® logo applied via embroidery on the left chest. The client’s artwork was digitised into an embroidery file to ensure the interlocking “S3” design and registered trademark symbol were rendered with clean, defined satin stitching in white thread, providing strong contrast against the dark shell fabric. A pre-production sample was stitched to confirm logo placement, sizing, and thread colour accuracy before the full run commenced. Each completed jacket — with its stand collar, ribbed cuffs, and dual zippered front pockets — was inspected for consistent stitch density and alignment before delivery.
United World College of South East Asia – East required 50 units of eco-friendly notepads with pens, each featuring a single-colour logo printed on the notepad cover. The emphasis on environmentally conscious stationery aligned with the school’s sustainability values, while the branded notepads served as practical items suitable for staff use or event distribution.
MeowPrint produced 50 units of the EC13 Eco-Friendly Notepad with Pen, each customised with the UWC South East Asia globe logo and “East Home and Community Languages” text. The branding was applied via silk screen printing in black ink onto the natural kraft cover, positioned along the lower front panel for clean visibility against the brown recycled material. Each notepad opens to reveal a built-in yellow sticky note pad, coloured page markers in green, pink, yellow, and blue, a white writing pad, and a kraft-barrelled pen with black accents — all secured within the hardcover folder and held shut by a black elastic band. A quality check confirmed consistent ink adhesion and legibility across all 50 units before delivery was completed.
Muhajirin Mosque required 50 pieces of custom sublimation-printed patches with iron-on backing, designed to be easily applied to garments or fabric items. The patches needed to feature vibrant, full-colour designs achieved through sublimation printing, combined with embroidered detailing for a polished and durable finish.
MeowPrint produced 50 custom round patches for Muhajirin Mosque using a combination of sublimation printing and embroidery. The full-colour mosque building artwork — featuring detailed red roof tiling, the minaret, surrounding greenery, and the Muhajirin logo with both Arabic and English text — was sublimation-printed onto a white polyester fabric base, preserving sharp colour gradients and fine photographic detail. A golden yellow merrow-stitched border was then embroidered around the circumference, giving the patch a clean, finished edge while reinforcing durability. The reverse side was fitted with an iron-on adhesive backing for straightforward application to garments or fabric accessories. Each patch was inspected for colour accuracy and border consistency before delivery.
The Red Pencil (Singapore) required 100 custom hard enamel pins featuring their logo, each within 1.5 inches in size. The pins needed to be finished with a magnet button backing and individually packed in basic OPP plastic packaging.
MeowPrint produced 100 custom hard enamel pins featuring The Red Pencil’s mascot character — a stick-figure illustration wearing a distinctive UN-blue helmet with a dove-and-laurel emblem, holding a red pencil. The pin was die-cast into a custom contour shape following the character’s outline, with soft enamel colour fills in blue, red, white, and black, separated by raised polished nickel metal borders that give each colour section clean definition. A magnet button backing was fitted to the reverse side, allowing the pin to be attached without piercing fabric. Each finished pin was inspected for colour accuracy and enamel surface smoothness before being individually packed in OPP plastic packaging for easy distribution.
The Urban Redevelopment Authority required 200 custom soft enamel pins featuring their logo, each within a 1.0″ size. The pins were to be finished with gold plating and fitted with butterfly clutch backings, individually packed in basic OPP plastic packaging.
MeowPrint produced 200 custom soft enamel pins for the Architectural Heritage Awards, each die-struck from a custom mould to capture the intricate scrollwork, floral motif, and “Our Heritage Is In Our Hands” banner at the centre of the circular design. The recessed areas were filled with a rich golden-yellow enamel, contrasting sharply against the raised silver-toned metal lines and perimeter lettering. Each pin was fitted with a butterfly clutch backing for secure fastening and finished at a compact 1.0″ diameter. Every unit underwent visual inspection for enamel fill consistency and plating quality before being individually packed in OPP plastic bags and delivered to the client.
Finding Pictures Pte. Ltd. required A3 Cotton Canvas Tote Bags with Inner Pockets (12oz) customised with embroidery of their company logo. Key considerations included understanding the pricing factors related to logo size, confirming the minimum order quantity, and establishing the estimated lead time given a tight turnaround for providing the logo artwork.
MeowPrint produced these black 12oz cotton canvas tote bags with the Finding Pictures logo rendered in white embroidery, centred on the lower front face of each bag. The logo’s distinctive design — featuring fragmented bracket-style framing elements and spaced typography — required careful digitisation to ensure the fine geometric details and intentional letter gaps translated cleanly into stitch work. A sample proof was prepared to confirm thread tension and sizing before the full production run commenced. Each finished bag was inspected to verify consistent stitch density and sharp white contrast against the black canvas, with the inner pocket construction also checked for proper stitching. The completed order was packed and delivered within the agreed lead time.
Cannon Events Ltd required approximately full-colour sublimation printed lanyards with attached cardholders for a conference at Suntec Centre. The lanyards needed to follow the same specifications as a previous order but feature an updated logo design. With a tight turnaround of under two weeks, the order required expedited production and on-site delivery ahead of the event date.
MeowPrint produced full-colour sublimation printed lanyards on a white polyester base, featuring the Maritime Risk Management branding in dark teal — including the company name, a wave-style logo icon, and the “10 Years on the Market” commemorative tagline repeated along the lanyard length. Sublimation printing was used to ensure the teal graphics and text were dye-infused into the fabric for sharp, durable reproduction that would not crack or peel during extended conference wear. Each lanyard was fitted with a metal lobster-claw hook and a black safety breakaway buckle at the neck, with cardholders attached as specified. Production artwork was verified against the client’s updated logo before printing commenced, and the full batch was completed and delivered to Suntec Centre within the two-week turnaround required.
The Singapore Physiotherapy Association Student Council required 50 pieces of custom-designed lanyards paired with portrait cardholders for an upcoming event, with a turnaround time of approximately 2.5 weeks. The lanyards needed to feature a fully custom design, and the accompanying badge reels were to be printed with the student council’s logo.
MeowPrint produced these lanyards using full-colour sublimation printing on a polyester fabric base, which allowed the detailed multi-colour artwork — featuring bold navy “Physiotherapy Class of 2025” text alongside colourful healthcare-themed illustrations of hearts, stethoscopes, medical crosses, and exercise figures — to be rendered with sharp clarity against the soft light blue watercolour-wash background. The repeating pattern was tiled consistently along the full length of the strap, with colour accuracy verified across the batch of 50 pieces. Each lanyard was fitted with a white retractable badge reel printed with the Singapore Physiotherapy Association logo, paired with a clear snap-button cardholder in portrait orientation. Production and quality checks were completed within the 2.5-week timeframe requested.
The Home Team Science & Technology Agency required 70 custom hard enamel pins across two designs featuring their logo. Each pin needed to be within 1.0″ in size, finished in hard enamel with butterfly clutch backings, and individually packed in basic OPP plastic packaging.
MeowPrint produced 140 custom hard enamel pins for HTX’s X Leadership Bootcamp, featuring a circular design with a space-themed astronaut illustration set against a deep purple enamel fill, surrounded by a white border carrying the event text. The client’s artwork was adapted into a die-struck metal mould with a polished silver-tone nickel finish, and each recessed section was filled with hard enamel — the purple centre and white outer ring — then kiln-fired and polished flush to the metal dividing lines for a smooth, durable surface. Each pin was fitted with a butterfly clutch backing and individually packed in OPP plastic bags, with the full order of 70 pieces delivered to the client ahead of their bootcamp event.
Home Team Science & Technology Agency required 70 custom hard enamel pins across two designs for their Rocket project. Each pin needed to be within 1.0″ in size, featuring the agency’s logo in hard enamel with butterfly clutch backings, and individually packed in basic OPP plastic bags.
MeowPrint produced these custom hard enamel pins featuring a detailed rocket-and-astronaut design in a rich palette of deep red, orange, white, and light blue, with the HTX branding and “Building Beyond Bricks” tagline cleanly rendered along the rocket body. The artwork was die-struck into a custom-shaped metal mould that followed the irregular silhouette of the rocket and astronaut figure, with raised nickel-plated metal borders separating each enamel colour fill. After enamel filling and polishing, each pin was fitted with a standard butterfly clutch on the reverse for secure fastening. All 70 pieces were quality-checked for colour accuracy and enamel consistency, then individually packed in OPP bags for easy distribution at the event.
Aqua Matters Pte Ltd, a returning customer, required A4 canvas tote bags printed with their existing design. As a repeat order, the company needed the bags to be produced consistently with their previous specifications, ensuring brand continuity across their tote bag inventory.
MeowPrint produced 8oz natural canvas tote bags using silk screen printing in a single dark navy blue ink colour. The JÄÄDE brand name and accompanying tagline “Loved in Finland, Enjoyed by the World” were screen printed with sharp, clean edges — particularly important given the elegant serif typeface and the decorative swash detailing across the letterforms. As this was a repeat order for Aqua Matters Pte Ltd, the existing screen was referenced to ensure colour density and print positioning on the lower-centre of the bag matched prior production runs. Each piece was inspected for ink coverage consistency against the natural cotton weave before final packing and delivery.
Cyndi required stainless steel tumbler mugs featuring a company logo, and needed to confirm the maximum printable area available on the tumblers to ensure the logo could be reproduced at the desired size.
MeowPrint produced the AM51 stainless steel tumbler mug in white with a matte powder-coated finish, featuring the T&T Salvage ship wheel logo and contact details applied via UV printing. The artwork — a gold-toned helm emblem with a bold red “T” at centre, accompanied by black text lines for the 24-hour emergency and Singapore office numbers — was positioned prominently on the front face of the tumbler to maximise visibility within the printable area. UV printing was selected to ensure sharp colour reproduction of the multi-colour logo against the white body, with strong adhesion to the curved stainless steel surface. Each tumbler was inspected for print alignment and colour accuracy before being fitted with its clear sliding lid and prepared for delivery.
The National University of Singapore required 500 pieces of full-colour sublimation-printed lanyards with attached cardholders, to be delivered within a tight turnaround of 2.5 weeks. The order was processed through NUS’s formal procurement system, ARIBA, reflecting the university’s structured purchasing protocols and the need for a reliable supplier capable of meeting institutional timelines.
MeowPrint produced 500 pieces of full-colour sublimation-printed lanyards for the NUS Yong Loo Lin School of Medicine’s Healthy Longevity Translational Research Programme. The artwork featured a light blue base with white DNA helix motifs running along the strap, transitioning into a vibrant hexagonal pattern in blue, orange, and white near the neck area — all reproduced through dye-sublimation printing to achieve edge-to-edge, full-bleed colour on the polyester material. The NUS crest and programme name were printed repeatedly along the lanyard length, ensuring consistent branding visibility from any angle. Each piece was fitted with a metal lobster clasp and crocodile clip attachment, paired with an add-on cardholder. The order was fulfilled within the 2.5-week timeframe required, processed through NUS’s ARIBA procurement system.
Changi Airport Group required stainless steel tumblers to be customised with their branding. The project had a comfortable timeline with no urgent deadline, allowing sufficient lead time for production and quality assurance.
MeowPrint produced the AM52 stainless steel tumbler in an olive-grey colourway, customised via silk screen printing for the Changi Airport Group’s Airside Professional Shift Team (APST). The artwork featured a dual-logo layout — the stylised “A” emblem alongside the APST aircraft graphic — separated by a vertical divider and printed in white ink on the upper body of the tumbler. Silk screen printing was selected to achieve clean, opaque coverage of the detailed line work against the matte powder-coated surface. Each unit was inspected for print alignment and adhesion before the black flip-top lids and included straws were assembled. The completed order was packed and delivered within the agreed lead time.
Baker McKenzie Wong & Leow required 70 pieces of premium cotton t-shirts for their team needs. Prior to confirming the order, the firm requested physical samples to assess the material’s feel and quality, ensuring the selected fabric met their standards before proceeding with production.
MeowPrint produced 70 units of the AG180 Prime Siro Cotton T-Shirt in white, with physical samples provided to the client for fabric assessment before full production commenced. The front featured two chest-level prints — the Baker McKenzie logo in red on the right chest and the “Singapore Empower” event mark in navy and red on the left chest, with distinctive red corner brackets framing the text. The back carried a larger composition: the same “Singapore Empower” branding at the top, paired with a detailed multi-colour Singapore skyline illustration incorporating the Merlion, Supertrees, and geometric patterns in red, navy, and light blue. Direct-To-Film (DTF) printing was selected to reproduce the fine linework and multiple colour layers with sharp definition on the 180gsm siro cotton fabric. Each piece was inspected for print alignment and colour accuracy across the front and back panels before delivery.
The Republic of Singapore Navy required 50 pieces of stainless steel tumbler mugs with custom UV-printed designs. The order called for 400ml capacity tumblers that could be produced in a short turnaround, suitable for use as commemorative or unit-related merchandise.
MeowPrint produced 50 units of the AM11 stainless steel tumbler mug in white, each customised with the unit’s circular emblem via UV printing. The multi-colour design — featuring a red and black Spartan helmet motif, checkered flag accents, the number “91,” and the motto “Fight Valiantly, Fight Safely / Always Safe, Forever Valiant” — was printed directly onto the glossy white outer shell, positioned centrally on the front face of each mug. UV printing was selected for its ability to reproduce fine detail and strong colour opacity on the curved surface, ensuring the red, black, and cream tones of the badge rendered sharply against the white body. Each mug was fitted with its brushed stainless steel rim and black sliding lid, then visually inspected before packing to confirm print adhesion and alignment across the batch.
Verdant Energy required 50 pieces of PU leather notebooks for their corporate needs. During the planning phase, they requested mockup visualisations in several colour options before making their final selection. After reviewing the variations, Verdant Energy chose navy as the colour that best aligned with their branding.
MeowPrint produced 50 units of the NB52 PU leather notebook in a rich navy blue, selected by the client after reviewing colour mockups prepared during the planning stage. The Verdant Energy logo and company name were applied to the lower-left area of the front cover using UV printing, which allowed the multi-toned leaf icon to render in light blue gradients while the “Verdant” and “ENERGY” text printed in silver — both standing out crisply against the dark PU surface. The UV method ensured strong adhesion to the leather-textured cover without compromising the smooth finish. Each notebook was supplied with a matching navy elastic closure band and a brown ribbon bookmark, and all units were inspected for print alignment and colour consistency before delivery.
Dorea required stainless steel tumblers (900ml) with UV printing, featuring two distinct design variations — one with an image alone and another combining the image with a small quote. Dorea also needed clarification on the minimum and maximum printable dimensions, as well as the feasibility of applying a vertical print orientation rather than the standard horizontal layout shown in reference examples.
MeowPrint produced these AM48 900ml stainless steel tumblers in a matte black finish using UV printing to render the SAF Counselling Centre shield crest in full colour. The multi-colour artwork — featuring the red and white vertical stripes, black stylised lettering, and the “Respect Care Dignity” motto ribbon beneath the shield — was printed in a vertical orientation on the upper body of the tumbler, centred beside the handle. UV printing was selected for its ability to reproduce fine detail and strong colour opacity on the dark powder-coated surface, ensuring the red, white, and black elements of the crest remained vivid and well-defined. Artwork files for both design variations were formatted to fit within the confirmed printable area, and a proof was approved before the production run of the full order.
National Cancer Centre Singapore (NCCS) required approximately 150 customised lanyards for an event scheduled in February 2025. The team needed full-colour printed lanyards with cardholders, and sought clarity on available design options as well as production lead times to ensure timely delivery ahead of the event.
MeowPrint produced these lanyards for NCCS’s Integrative Oncology Symposium using full-colour dye sublimation printing on smooth satin lanyard material, which allowed the intricate botanical background — featuring a gradient transition from soft pink to pale cream with delicate olive-green foliage and pink floral illustrations — to reproduce with sharp detail and rich colour saturation. The event title, “Transforming Cancer Care with Integrative Oncology Symposium,” was printed in bold dark purple-brown text across both sides of the lanyard, maintaining strong legibility against the multi-toned background. Each lanyard was fitted with a metal lobster-claw clasp and paired with a cardholder attachment. Colour proofs were confirmed ahead of production to ensure the gradient and botanical elements aligned with the client’s branding, and the full batch of approximately 150 pieces was completed and delivered ahead of the February event date.
Singapore Zoological Gardens required 50 pieces of nylon backpacks customised with their branding via silk screen printing. The order was processed through a formal purchase order, reflecting the organisation’s standard procurement procedures for corporate merchandise.
MeowPrint produced 50 units of the BP73 nylon backpack in a heathered blue-grey colourway with black mesh base panelling, customised via silk screen printing in white ink. The artwork layout featured the Mandai Wildlife Reserve logo with its distinctive animal silhouette icons positioned on the upper front panel, with the “Wildlife Adventures at Mandai Wildlife Reserve” event text and “Supported by” Meta logo placed below on the lower portion of the front face. Careful alignment was required to ensure both the primary branding and co-branding elements sat cleanly on the fabric despite the diagonal zip running across the panel. Each printed backpack was inspected for ink adhesion and registration accuracy on the textured nylon surface before bulk delivery was completed to fulfil the purchase order.
Money Mindfulness Ltd required 50 custom soft enamel pins featuring their logo, each measuring within 1.5 inches. The pins needed to be finished with butterfly clutch backings and individually presented with backing cards for a polished, professional presentation.
MeowPrint produced 50 custom soft enamel pins faithfully reproducing the Money Mindfulness brain-and-dollar-sign logo in vibrant blue, green, red, and yellow enamel fills, with raised black nickel metal borders defining each colour segment and the multicoloured “MONEY MINDFULNESS” lettering beneath. The pins were die-struck to fit within 1.5 inches and fitted with butterfly clutch backings for secure fastening. Each pin was individually mounted on a custom-printed backing card featuring the client’s branding, orange and yellow wave graphics, social media handles, and a QR code — produced on sturdy card stock with a full-colour digital print for a professional presentation-ready finish. Colour accuracy on both the enamel fills and the backing card artwork was verified against the client’s brand guidelines before final dispatch.
The Singapore Police Force required 100 units of the Uno Nuovo Microban Polo T-Shirt in grey, featuring a single logo embroidery measuring 3″ × 3″ on the left chest. The antimicrobial properties of the chosen polo made it a practical choice for uniforms intended for regular operational use.
MeowPrint fulfilled this order using the Uno Nuovo Microban Polo T-Shirt in a dark grey colourway, a moisture-wicking fabric with built-in antimicrobial treatment suited for daily operational wear. The client’s gear-and-gavel logo was converted into a digitised embroidery file, with stitch density and pathing optimised to reproduce the fine details of the cog teeth and hammer cleanly at the 3″ × 3″ size. Production involved white and grey thread embroidery on the left chest, positioned just beside the button placket for a professional, uniform appearance. Each piece was inspected for consistent stitch quality, thread tension, and accurate logo placement across all 100 units before delivery.
Kentucky Fried Chicken Management Pte Ltd required multi-purpose bags for an event collaboration. The bags needed to be customised with branded graphics using direct-to-film printing to ensure vibrant, durable visuals suited for high-volume event distribution.
MeowPrint produced two variants of the MB18 multi-purpose bag for KFC’s collaboration with mofusand — one in black and one in red — each featuring distinct full-colour character illustrations alongside the white “KFC x mofusand” co-branding. Direct-to-film (DTF) printing was used to transfer the detailed mofusand cat illustrations, including the lion dance characters on the red variant and the fried chicken-themed characters on the black, with strong colour opacity and fine detail retention on the canvas-textured fabric. The DTF method ensured that the multi-toned artwork — with its warm oranges, greens, and subtle gradients in the fur textures — adhered cleanly to both the dark and vibrant base colours without loss of vibrancy. Each bag was finished with a metal zipper pull, and quality checks confirmed consistent print registration and colour accuracy across the production run ahead of the event distribution date.
ReFormd required basic cotton round neck t-shirts for their gym, printed with their branding via silk screen printing. The order called for a comfortable 160gsm cotton fabric suitable for active wear, with a focus on durability and a clean, consistent print finish across the full run.
MeowPrint produced black CT51 round neck cotton t-shirts using silk screen printing across multiple print positions. The front chest featured a stacked “REFORMD” wordmark in white and red, while the right sleeve carried the “REFORMD.CO” URL in white — requiring precise registration on a smaller print area. The back incorporated a more complex multi-colour design with the RF monogram, a gradient chevron graphic transitioning from red to pink, and vertical “PROGRESS ALL WAYS” text in alternating white and red. Each print position required separate screen setups, and colour accuracy was checked throughout the run to maintain consistency across all pieces on the dark base fabric.
SevenRooms required NB10 PP Plastic Cover Notepads, each featuring their logo printed in white via silk screen printing. The order came with a tight turnaround of just 7 days, necessitating efficient coordination and expedited production to meet the delivery deadline.
MeowPrint produced a coordinated stationery set comprising the NB10 PP plastic cover notepad and a matching black metal pen, both customised with the SevenRooms logo in white via silk screen printing. The notepad featured a black PP plastic cover with silver wire-o binding, while the front incorporated a frosted translucent PP overlay that partially revealed the branded cover beneath — creating a distinctive layered presentation. The white logo was screen-printed cleanly against the solid black surface on both the notepad cover and pen barrel, ensuring strong contrast and consistent branding across the set. Artwork alignment and colour density were verified through pre-production proofs before the full run proceeded, and the completed order was delivered within the seven-day turnaround window.
Parkway Group Healthcare Pte Ltd required 150 custom soft enamel pins featuring their logo, each measuring 2.5cm in width with a butterfly clutch backing. The pins needed to be produced as branded keepsakes, with precise reproduction of the company logo in the soft enamel finish.
MeowPrint produced 150 custom soft enamel pins at 2.5cm width, die-cast from metal with a black nickel plating that forms the raised outlines and outer rim of the circular design. The client’s “i.care” logo and dual-hand motif were faithfully reproduced, with purple and olive-grey enamel fills for the hands set against a white centre, and a soft pink enamel border carrying the “IHH Mental Health First Aider” and “Certified MHFA” text. Each pin was fitted with a standard butterfly clutch on the reverse for secure fastening. Colour accuracy was verified against the approved artwork proof before the full production run was completed and delivered.
National University of Singapore required 300 pieces of full-colour sublimation printed lanyards with cardholders for department staff use. The university provided distinct artwork for each side of the lanyard strap and subsequently refined the design for a cleaner background. Ensuring adequate visibility and sizing of the NUS logo on the lanyard was a key concern throughout the design process.
MeowPrint produced these lanyards using full-colour dye-sublimation printing on smooth satin polyester straps, enabling edge-to-edge coverage on both sides with distinct artwork. The front face features the department name “Microbiology & Immunology” in bold orange text alongside the NUS crest and “Since 1925” tagline in navy blue, while the reverse displays a watercolour-style pattern of microorganism illustrations in teal and warm brown tones. Multiple artwork proofs were prepared to refine the background and ensure the NUS logo and crest were reproduced at a legible size with accurate colour matching across the blue, orange, and multi-colour elements. Each lanyard was finished with a metal lobster-claw clasp and paired with an add-on cardholder before the full run of 300 pieces was completed and delivered.
School of the Arts, Singapore (SOTA) required 44 pieces of anti-odour performance dri-fit eyelet t-shirts with silk screen printing. The shirts needed to be functional and durable, suited for active use within the school’s programmes, with a quick turnaround.
MeowPrint produced 44 pieces of navy blue UDF01 anti-odour dri-fit eyelet t-shirts for SOTA, using silk screen printing to apply the “Branching Out Together” leaf motif and accompanying text in white ink on the left chest area, with additional white print on the right sleeve. Silk screen printing was selected for its strong ink adhesion on synthetic eyelet mesh fabric, ensuring the design holds up through repeated washing during active use. Artwork was prepared to ensure clean, sharp edges on both the leaf graphic and the mixed-case lettering, and each shirt was inspected for print alignment and coverage consistency before final packing and delivery.
Yazid required 40 custom double-sided acrylic keychains for Tuas Fire Station. Each keychain needed a unique QR code with the individual’s name printed on one side and the station logo on the other. The order comprised 23 personalised keychains, each featuring a distinct QR code and name, along with 17 pieces bearing a generic Tuas Fire Station QR code.
MeowPrint produced 40 double-sided acrylic keychains using UV printing to deliver sharp, durable graphics on both faces of each piece. The front side featured the Tuas Fire Station shield crest in full colour — with its distinctive red border, laurel wreath detailing, and yellow firefighter helmet emblem set against black and blue accents — while the reverse carried a black QR code and personalised name text on a clean white background. Since the order required 23 unique name-and-QR combinations alongside 17 generic pieces, each print file was individually prepared and verified before production to ensure correct pairing. The clear acrylic housing with a silver split-ring chain attachment kept both printed inserts securely enclosed, and each finished keychain was checked for QR scannability prior to delivery.
Alpha Get required 33 custom name tag embroidery patches with velcro backing, produced exclusively using embroidery. The patches needed to be completed in time, ensuring each piece met consistent quality standards for easy attachment and removal.
MeowPrint produced 33 custom name tag patches using embroidery on a black twill base, with white thread stitching for the personalised text across two lines — the individual’s name and role designation. The artwork was digitised to ensure clean letterforms, including accented characters such as the é in “Géraud,” which required precise needle spacing to maintain legibility at this compact patch size. Each rectangular patch was finished with a merrow-stitched black border for a clean edge and fitted with velcro backing on the reverse side, allowing secure attachment and easy removal from uniforms or gear. Every piece was inspected for consistent thread tension, colour accuracy, and proper velcro adhesion before the batch of 33 was dispatched.
Rehlko Singapore Pte Ltd required dri-fit long-sleeve polo t-shirts featuring dual branding elements: an embroidered logo on the left chest measuring 3″ × 3″, complemented by a single-colour silk screen print within A4 size on the back. The order called for a consistent, professional look across all units, combining both embroidery and screen printing techniques on each garment.
MeowPrint produced white dri-fit long-sleeve polo tees using the QD67 base garment, combining two customisation methods on each piece. The blue arrow-shaped Rehlko logo on the left chest was rendered via embroidery, with dense satin stitching in a rich blue thread that provides a raised, textured finish against the white honeycomb dri-fit fabric. For the back, the full Rehlko wordmark and icon were applied using single-colour silk screen printing in a matching blue ink, positioned centrally below the collar for a clean, corporate look. Each unit was inspected for consistent stitch density on the embroidery and uniform ink coverage on the screen print before the completed order of was packed and delivered.
Church of the Holy Spirit required 70 pieces of cotton round neck t-shirts for their community. The shirts needed to be durable and comfortable, with custom designs applied via silk screen printing to ensure bold, long-lasting prints suitable for group identification and regular wear.
MeowPrint produced 70 units of CT60 Superior Cotton round neck t-shirts in a sand/khaki colourway, printed using single-colour silk screen printing in a dark brown ink on the front chest area. The artwork featured the “Off the Boat” theme for CHS Youth Retreat 2024, comprising an illustrated biblical scene, stylised event title lettering, and a Mark 1:17 scripture quote — all consolidated into a single front print with the back left unprinted. The dark brown ink was selected to complement the warm-toned base fabric, producing strong contrast and clear legibility without requiring multiple colour passes. Each piece was inspected for print alignment and ink coverage consistency before being counted, sorted by size, and prepared for delivery ahead of the retreat date.
SIA Engineering Company Limited required full-zip executive bomber jackets with embroidery finishing for their staff. Prior to confirming the order, they needed to assess the jacket material and embroidery quality in person. Additionally, they required guidance on determining appropriate sizing for their staff based on available weight and height data.
MeowPrint supplied the EJ03 full-zip executive bomber jacket in dark navy, with dual embroidery placements on the front chest — the LMD Maintenance Planning “MP” logo in white thread on the right chest and the SIA Engineering Company bird motif in gold and yellow thread with white text on the left chest. Prior to bulk production, a physical sample jacket with completed embroidery was provided so the client could assess both the fabric weight and stitch quality first-hand. Thread colours were carefully matched to ensure the gold-yellow gradient of the bird logo rendered accurately against the dark shell fabric. A size chart was provided for client to review based on their data. Each completed jacket was inspected for consistent stitch density and logo positioning before delivery.
Synspective SG Pte. Ltd. required 100 pieces of customised pens featuring their updated company logo. With a recent rebranding, it was essential that the new logo was accurately reproduced across the selected pen models. The team also needed the order fulfilled within a one-week turnaround to meet their internal distribution timeline.
MeowPrint produced 100 customised pens across four PP5X model variants, each featuring the Synspective logo and wordmark in white UV printing on the glossy black barrel cap. The artwork was prepared to ensure the stylised “S” icon and “Synspective” text reproduced crisply against the dark lacquer finish, with print positioning aligned consistently beside the silver clip on every unit. UV printing was selected for its strong adhesion to the smooth plastic surface and its ability to deliver sharp, opaque white coverage in a single pass. Each pen was inspected for print alignment and legibility before packing, and the full order was dispatched within the required one-week turnaround.
MY Lunasea, a visiting vessel docked in Singapore, required 120 pieces of custom snapback caps featuring embroidered branding for their crew. The order needed to be fulfilled within a limited window during the boat’s stay in port, making a quick turnaround essential to meet their departure schedule.
MeowPrint produced 120 units of the North Harbour NHC1200 six-panel snapback cap in navy blue, customised with embroidery on both the front and back panels. The client’s “LUNASEA” wordmark — featuring a distinctive crescent motif integrated into the letter “U” — was stitched in white thread across the front centre, while “Singapore 2024” was embroidered in matching white on the rear. The artwork was digitised in-house to ensure the spaced letterforms and curved design detail reproduced cleanly on the structured crown. Stitch density and thread tension were verified against a pre-production sample before the full run proceeded, and the completed order was delivered within the vessel’s port schedule.
Racket Asia Pvt Ltd required white Gildan Hammer Heavyweight Adult T-Shirts customised with full-colour DTF printing across three placement areas: a front chest logo within A4 size, a smaller logo on the right sleeve, and an additional A4-sized logo on the back bottom. The multi-placement design called for precise positioning and consistent colour reproduction across all print locations.
MeowPrint produced these white Gildan Hammer heavyweight cotton tees using DTF (Direct-To-Film) printing across three placement areas. The multi-colour logo — featuring light blue text on black parallelogram backgrounds, bold black lettering, and a yellow-green “co.” accent — was printed with sharp colour separation and consistent vibrancy on the front chest, right sleeve, and back bottom positions. DTF was selected for its ability to reproduce the logo’s fine detail and solid black fills cleanly on the heavyweight cotton substrate. Each print location was individually aligned using positioning guides to ensure uniform placement across the production run, and colour matching was verified against the approved artwork before the full batch proceeded.
Care Corner Singapore required custom embroidery patches, each featuring a keyring hole to allow the patches to double as functional accessories. The design needed to be produced with precise embroidery detailing while incorporating the structural modification for keyring attachment.
MeowPrint produced custom embroidered patches on a yellow twill fabric base, featuring the Care Corner logo in blue and red thread alongside a detailed bear mascot character rendered in multiple thread colours — dark brown, tan, pink, and blue — capturing fine details such as the cap and facial expression. The client’s artwork was digitised for multi-colour embroidery, and the patches were finished with a matching yellow satin overlock border stitched around all four edges for a clean, durable perimeter. A metal eyelet was press-fitted into the upper corner of each patch, reinforcing the fabric to allow attachment to a keyring or lanyard. Each piece was inspected for stitch density, eyelet alignment, and colour accuracy before delivery.
SAFRA National Service Association required custom hard enamel pins featuring their logo, sized within 1.5 inches. The pins needed to be fitted with butterfly clutch backings and individually presented with backing cards, ensuring a polished and professional finish suitable for distribution.
MeowPrint produced custom hard enamel pins for SAFRA Choa Chu Kang’s “Future Talents For The Young” programme, featuring a detailed astronaut character in red, grey, and black enamel with raised gold-tone metal outlines separating each colour fill. The circular pin design incorporated the “Our Future Talents” script lettering and musical note accents, all held within clean die-cut edges and a polished silver-tone border. Each pin was fitted with a butterfly clutch backing and individually mounted on a custom-printed backing card bearing the SAFRA CCK branding, colourful geometric icons, and a pink cloud motif along the bottom edge — with programme messaging printed on the reverse. Colour accuracy across the enamel fills was verified against approved artwork proofs before the production run was finalised.
TDG required 50 pieces of black A3 cotton canvas landscape tote bags customised with their branding. The bags needed double-sided printing, with the company logo on one side and a graphic wording design on the other, each based on specific artworks provided by the team.
MeowPrint produced 50 pieces of black 8oz cotton canvas A3 landscape tote bags using silk screen printing on both sides. The front featured the TDG circular logo with a red outline ring and intersecting red lines, paired with white and red multilingual lettering centred within the emblem — requiring precise two-colour registration to maintain clean separation between the red and white ink layers on the dark canvas. The reverse side carried a bold white “CERTIFIED desi” typographic design, printed in a single white ink pass. Artwork files were reviewed and colour-separated into individual screens for each ink colour prior to production, and printed samples were checked for ink opacity and alignment before the full run proceeded.
Paean Solutions required 150 pieces of cotton bath towels customised with embroidery, suitable for corporate use or distribution. The order called for consistent, high-quality embroidered branding across all units to maintain a professional and cohesive appearance.
MeowPrint produced 150 units of TW08 cotton bath towels in a dark grey colourway, customised with embroidery featuring the co-branded VST ECS (伟仕佳杰) and Citrixasear logos in white thread. The artwork — which included both English and Chinese text, dual brand icons, and a vertical divider line — was digitised for embroidery to ensure clean stitch definition on the terry cloth surface. Logo placement was positioned just above the woven stripe band near the towel’s lower edge, keeping the branding visible whether the towel is laid flat or neatly folded. Each piece underwent stitch quality checks to confirm consistent thread tension and alignment across the full run of 150 towels before delivery.
Paean Solutions required 150 pieces of multi-purpose foldable shopping bags customised with their branding via silk screen printing. The bags needed to be practical and portable, serving as versatile corporate giveaways suitable for everyday use.
MeowPrint produced 150 black polyester foldable shopping bags, silk screen printed on the front face with a dual-branding layout featuring the VST ECS logo with Chinese characters (伟仕佳杰) positioned in the upper section and the Citrix ASEAN cross-motif logo below. The artwork was printed in solid white ink, which provided strong contrast and sharp edge definition against the black nylon material — verified through pre-production proofing to ensure both the fine details of the interlinked cross icon and the bilingual text reproduced cleanly. The back of each bag was left unprinted, keeping the reverse clean. Each unit was quality-checked for print alignment and ink adhesion before being folded into its compact form for bulk delivery.
The Volleyball Association of Singapore required 50 pieces of cotton hand towels customised with embroidery, suitable for use within the association’s activities and events.
MeowPrint produced 50 white cotton hand towels with the Volleyball Singapore logo applied via multi-colour embroidery. The artwork was digitised to accurately reproduce the red volleyball icon — including its crescent and star details — alongside the “Volleyball” text in black thread and “Singapore” in red, positioned towards the lower right corner of the towel. Embroidery was chosen over print to ensure the branding would withstand repeated washing without fading, an important consideration for towels used during sporting activities. Each piece was inspected for stitch density and colour accuracy against the approved artwork before delivery was completed.
JL Cable Detection Pte Ltd required 49 pieces of maroon long-sleeve polo t-shirts for their team, featuring embroidery on the front and silk screen printing on the back. The dual-method customisation was essential to achieve a professional, branded look suited to their fieldwork environment.
MeowPrint produced 49 units of the UDF27 long-sleeve dri-fit polo in a deep maroon colourway, applying two distinct customisation methods across the front and back. The left chest featured embroidery of the JL Cable Detection logo — the “JL” icon stitched in orange-red thread alongside the company name in white — providing a raised, textured finish that holds up well in demanding fieldwork conditions. For the back, silk screen printing was used to reproduce the bold white “JLCD” abbreviation and the full “JL Cable Detection” text beneath it, ensuring high visibility at a larger scale. Thread and ink colours were matched against the client’s brand guidelines before production commenced, and each piece was inspected for stitch density and print adhesion prior to packing. The completed order of 49 shirts was delivered on schedule.
JL Cable Detection Pte Ltd required anti-odour dri-fit long-sleeve polo t-shirts in Iron Grey for their team. The customisation specifications included a logo embroidery within 3″ width on the left chest, along with a single-colour white logo silk screen printed within A4 size on the back.
MeowPrint produced these long-sleeve polo tees using the UDF27 Anti-Odor Dri-Fit Polyester base in Iron Grey, combining two customisation methods for a professional uniform finish. The left chest featured the JL Cable Detection logo applied via embroidery, with the red “JL” icon and white company name stitched cleanly against the grey honeycomb-textured fabric. The back was customised using single-colour white silk screen printing, featuring a large “JLCD” abbreviation, the full company name, and a “Supervisor” designation — layered in descending text sizes for clear on-site identification. Each piece was checked for embroidery thread consistency and print alignment before delivery.










